D1WP Connected Multifunction Alert - Doorbell product photo
Product photos · OEM/ODM variants available
Connected Multifunction Alert Series · Smart Doorbells

Connected Multifunction Alert Series - Full Series

The D1 and B12 connected alerts are a modular caregiver platform: one hub-style receiver pairs with different plug-in sensors - SOS button, door contact, PIR motion, water detector or tilt sensor - so a care operator can build the right alert set for each resident. The D1 models are app-connected (32 ringtones, 7 colours, app control) and the B12 models pair dedicated sensors to the same receiver family.

6 modelsFactory directSamples available

Shared Platform Specification

All 6 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

Connected multifunction alertReal-time notification, 32 ringtones, 7 colours, built-in nightlight, 3 alert modes
D1 seriesD1WP doorbell alert, D1WS medical alert, D1WC entry alert
B12 seriesB12WM motion alert, B12WS water leak alert, B12WT mailbox alert
Flash / vibration pager BF / BW / M / M558 high quality tunes, strong vibration, 500 ft wireless range, IP55, portable caregiver pager, CE / FCC / RoHS
Compatible triggersSmoke alarm, SOS button, vibration sensor, sump pump alarm, flashing strobe, contact sensor, tilt sensor, power failure alarm, PIR motion sensor, driveway sensor, smart gateway
Caregiver optionsFlash receivers, wearable vibration pagers, caregiver call transmitters
DocumentationFlash brightness, vibration pattern and button size are configurable within an OEM programme

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
D1WPApp-connected alert with 32 ringtones and 7 colours2026 catalog
D1WSConfigured with an SOS button sensor2026 catalog
D1WCConfigured with a door contact sensor2026 catalog
B12WMConfigured with a PIR motion sensor2026 catalog
B12WSConfigured with a water detector2026 catalog
B12WTConfigured with a tilt sensor2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

D1WP

Positioning: The app-connected base alert with the full 32-ringtone / 7-colour feature set.

Best fit (recommended): Recommended as the core of a connected-care range: existing-carers can use the app and colour/ringtone options to distinguish alerts by resident or by event type.

D1WS

Positioning: The SOS-button configuration, for a resident to summon help directly.

Best fit (recommended): Recommended for elderly-care and assisted-living rooms where the user needs a single, obvious button to call for assistance - the SOS sensor pairs to the same D1 receiver.

D1WC

Positioning: The door-contact configuration, for monitoring entry and exit.

Best fit (recommended): Recommended where a carer needs to know if a resident has opened a door - useful for wandering-alert programmes and for monitoring a front door in assisted living.

B12WM

Positioning: The PIR-motion configuration, for detecting movement in a room.

Best fit (recommended): Recommended for activity monitoring where no door is involved - a PIR on the same B12 receiver can signal movement in a hallway or room without a camera.

B12WS

Positioning: The water-detector configuration, for leak alert in a care setting.

Best fit (recommended): Recommended for kitchens, bathrooms and utility areas in care facilities, where an early water alert prevents damage and pairs to the same receiver as the other sensors.

B12WT

Positioning: The tilt configuration, for detecting movement or opening of an object.

Best fit (recommended): Recommended for niche care and safety cases - a bed-exit or equipment-tilt alert - where a simple tilt event needs to reach a carer receiver without a camera.

Key Characteristics

Flash receivers, vibration pagers and caregiver transmitters

Configurable brightness, vibration pattern and button size

Large-print and multi-language documentation options

Samples recommended for user trials

Per-unit functional test with signed final QC checklist

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.