M1 Entry Alert Doorbell product photo
Product photos · OEM/ODM variants available
Entry Alert M / K Series · Smart Doorbells

Entry Alert M / K Series - Full Series

The M and K entry-alert lines signal when a door, gate or path is used. The M series uses a magnetic door/window contact sensor, while the K series uses a PIR motion sensor - two different sensing methods for two different installation problems - paired with an indoor chime receiver.

4 modelsFactory directSamples available

Shared Platform Specification

All 4 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

Product familyDriveway sensor kits, entry chimes and welcome alerts
Driveway sensor FS01DMotion activated, 16 ft / 60 degree detection
Long-range variantsFS05D / FS06D / FS07D PLUS receiver families; FS06D has a 4-channel display; FS07D PLUS adds solar and 1/4 mile range
Entry alert M1 / M2 / K1 / K2M1 / M2 magnetic contact type; K1 / K2 PIR motion type; automatically rings on entry
Entry alert performanceUp to 16 ft / 110 degrees, 500 ft operating range, 58 ringtones, eye-catching indicators
EngineeringSensor optics, RF link, receiver firmware and enclosure tooling developed in-house
OEM optionsReceiver styling, chime sounds, sensor housing, logo, packaging and kit composition

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
M1 (web ref. K9)Magnetic door/window contact sensor type2026 catalog
K1PIR motion-sensor type2026 catalog
M2 (web ref. K5)Magnetic contact variant; shared M platform2026 catalog
K2PIR motion variant; shared K platform2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

M1 (web ref. K9)

Positioning: The magnetic-contact entry alert, for detecting the open/close of a door or gate.

Best fit (recommended): Recommended where the buyer wants to know that a specific door or gate was opened - a back door, shed or garden gate - because a magnetic contact gives a clean, unambiguous open/close event.

K1

Positioning: The PIR-motion entry alert, for detecting movement along a path or approach.

Best fit (recommended): Recommended where the buyer wants an alert as someone approaches, rather than only when a door opens - a front path, hallway or driveway edge - since a PIR sees movement before the door is reached.

Further entry-alert variants (M2 / K2)

In the Entry Alert M / K Series range, Further entry-alert variants (M2 / K2) are handled as one group. The M and K entry-alert lines signal when a door, gate or path is used. The M series uses a magnetic door/window contact sensor, while the K series uses a PIR motion sensor - two different sensing methods for two different installation problems - paired with an indoor chime receiver. These models are grouped because the printed sources do not state a per-model electrical difference for them; writing a separate positioning for each would invent a difference that does not exist. Request samples to compare the exact appearance before committing to a SKU.

Key Characteristics

Sensor optics, RF link and receiver firmware designed in-house

Doorbell-class receiver with configurable chime set and entry-alert behaviour

Configurable receiver styling, range tier and kit composition

Weatherproof sensor housing options

Samples for on-site range and false-trigger testing

Model-specific CE / FCC / RoHS / UKCA file

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.