Shared Platform Specification
Shared printed specification: 110 dB maximum alarm; water detection from top and bottom; IP65; standby < 5 uA; RF 433.92 MHz; 3-year battery life; expandable; -10 C to 55 C, RH 10%-90%.
| Leak detector - power | DC 3 V, 2 x AAA (LS01 / LS02 / LS03 / LS04); LS05-PLUS: DC 3 V, 2 x AA |
|---|---|
| Wireless range | 500 ft open air (LS02 / LS03); 1500 ft open air (LS05-PLUS) |
| Standby current | < 5 uA |
| Siren volume | 110 dB max |
| RF frequency | 433.92 MHz |
| Waterproof rate | IP65 |
| Detection | Detects water from top and bottom; 3-year battery life; expandable |
| Operating environment | -10 C to 55 C, relative humidity 10%-90% RH |
| Valve controller B12WT-MVC05 | USB DC 5 V Type-C; RF 433 MHz; 150 m open air; DN15/DN20 bracket; 3-8 s open/close |
Model Differences
LS01 / LS02 share a round housing and 500 ft link on 2 x AAA; LS03 / LS04 share a square housing and the same 500 ft link; LS05-PLUS uses a tall housing, 2 x AA and a 1500 ft link. No further per-model electrical difference is printed.
| Model | What differs | Source |
|---|---|---|
| LS01 (web ref. WS01) | Round housing; 2 x AAA; 500 ft open-air link | 2026 catalog p29 |
| LS02 (web ref. WS01) | Round housing; 2 x AAA; 500 ft open-air link | 2026 catalog p29 |
| LS03 (web ref. WS01) | Square housing; 2 x AAA; 500 ft open-air link | 2026 catalog p29 |
| LS04 (web ref. WS01) | Square housing; 2 x AAA; 500 ft open-air link | 2026 catalog p29 |
| LS05-PLUS (web ref. WS01) | Tall housing; 2 x AA; 1500 ft open-air link | 2026 catalog p29 |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
LS01 (web ref. WS01)
Positioning: The round-bodied detector in the LS01 / LS02 pair, using the standard 500 ft link.
Best fit (recommended): Recommended for a washing-machine or under-sink position where a round footprint is easier to place beside a drain.
LS02 (web ref. WS01)
Positioning: The second round-bodied variant - same printed power and range as LS01, listed separately for assortment and packaging choice.
Best fit (recommended): Recommended for a two-pack range where the buyer wants two identical detection points under one listing; confirm the pairing behaviour on samples.
LS03 (web ref. WS01)
Positioning: The square-bodied variant, the alternative form to the round LS01 / LS02 in the same 500 ft class.
Best fit (recommended): Recommended for a flat surface such as a basement floor or a utility shelf, where a square edge sits more neatly against a wall.
LS04 (web ref. WS01)
Positioning: The second square-bodied variant, giving a distributor two square SKUs in the same published platform.
Best fit (recommended): Recommended when a retailer wants a distinct SKU for a bundle without changing the detector platform; use the same datasheet and a different pack configuration.
LS05-PLUS (web ref. WS01)
Positioning: The long-range plus model: the only LS variant printed with 2 x AA batteries and a 1500 ft open-air link.
Best fit (recommended): Recommended for a detached garage, outbuilding or long basement run, where the 500 ft LS variants are unlikely to reach the receiver without a repeater.
Key Characteristics
Probe geometry, cable length and enclosure sealing validated together
Standalone, Wi-Fi and valve-controller tiers
Configurable alert behaviour and kit composition
Custom housing, logo and packaging
Full-assembly samples available
Applications
- Basement and laundry protection
- Sump and sewage pump monitoring
- Insurance loss-prevention programmes
- Plumbing and property maintenance channels
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

