P11 Wireless Touch Pad Pet Doorbell (Round) product photo
Product photos · OEM/ODM variants available
Pet Doorbell P Series · Smart Doorbells

Pet Doorbell P Series - Full Series

A pet doorbell lets a dog signal that it wants back inside without barking or scratching the door. The P11 and P12 pair a large, easy-to-hit wall transmitter with a plug-in chime receiver: AC 110-220 V 50/60 Hz with US / EU / UK / AU plug options and no receiver batteries needed, 52 ringtones with forward/backward selection, 4-step volume (25-110 dB), a 433 MHz learning-code link to prevent interference, an IP55 waterproof touch pad and up to 1000 ft open-air range.

2 modelsFactory directSamples available

Shared Platform Specification

All 2 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

ModelsP11 (round textured faceplate) and P12 (square faceplate) - wireless touch pad pet doorbells
Plug-in chime receiverAC 110-220 V 50/60 Hz, US / EU / UK / AU plug optional; no batteries needed for the receiver
Ringtones52 ringtones (16 chord) to choose from, forward / backward selection buttons
Volume4 steps volume control, 25-110 dB
RF link433 MHz learning code to prevent interference from other wireless transmitters
Touch button transmitterBattery powered, IP55 waterproof sensitive touch pad for indoor / outdoor use
Wireless rangeUp to 1000 ft (300 m) in open air; 300-500 ft with walls and doors
Indication and memoryLED indicators alert you when the doorbell cannot be heard; smart memory restores the ringtone after a power outage
ExpandabilityExpandable - pair multiple push buttons to one receiver and set a different ringtone per button
ComplianceCE / FCC / RoHS certified
Operating environment-20 C to 55 C, relative humidity 10%-90%
OEM optionsTouch-target size and sensitivity, transmitter finish, chime sounds, receiver housing, colourway and kit composition

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
P11Round textured faceplate on the wall touch pad2026 catalog
P12Square faceplate on the wall touch pad2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

P11

Positioning: The round-textured touch-pad variant, the original form of the pet doorbell.

Best fit (recommended): Recommended as the lead pet SKU for gift and pet-specialty channels: the large round pad is easy for a dog to hit and the textured surface reads as a purpose-built pet product rather than a human doorbell.

P12

Positioning: The square-faceplate variant, for buyers who prefer a cleaner, more architectural pad shape.

Best fit (recommended): Recommended as the second faceplate for retailers who want two visually distinct pet doorbells on the identical receiver and transmitter platform - the square form fits a modern interior without any electronics change.

Key Characteristics

Touch-pad transmitter sized for pet training and elderly-care use

Configurable melody set, volume level and receiver styling

Weatherproof transmitter housing options

Custom logo, colourway and kit composition

Samples for real-world range testing

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.