S1-D Standalone Door/Window Alarm product photo
Product photos · OEM/ODM variants available
S Series Standalone Door / Window Alarms · Smart Security

S Series Standalone Door / Window Alarms - Full Series

S1-D and S2-D are standalone door / window alarms printed on catalog page 37. Both run on 2 x AAA (DC 3 V), draw below 30 uA, reach 120 dB maximum, carry an IP20 rating and operate at -20 C to 55 C with 10%-90% RH. The real difference is the mode list: S1-D has four working modes and S2-D has five, adding a delay-reminder mode and a doorbell mode.

2 modelsFactory directNo hub required

Shared Platform Specification

Shared printed specification: DC 3 V, 2 x AAA; working consumption < 30 uA; 120 dB maximum alarm volume; IP20; -20 C to 55 C, RH 10%-90%; wireless, compact and easy to install.

Product familyDoor/window contacts, standalone door alarms, PIR motion detectors, strobe sirens, doorbell push buttons, SOS buttons and 4-button remotes
Hub compatibilityWireless alarm accessories pair with the T10 / T11 / T30 WiFi alarm hub; W1 / W5 / W6 and HP03W are standalone Wi-Fi devices that need no hub
Engineering scopeMagnet tolerance, lens geometry, RF behaviour, standby current and battery life are validated together as one system
OEM / ODM optionsHousing, colourway, modular face cover, logo, radio configuration, multipack packaging and kit composition
DocumentationModel-specific electrical parameters, the pairing matrix and certificate scope are supplied in the datasheet before ordering

Model Differences

S1-D prints four modes (1-minute alarm, opening alarm, doorbell, opening reminder). S2-D prints five modes and adds a delay-reminder mode. This is a function difference, not a claimed difference in volume or electronics.

ModelWhat differsSource
S1-D (web ref. FX-S1-R)4 working modes: 1-minute alarm, opening alarm, doorbell, opening reminder2026 catalog p37
S2-D (web ref. FX-S1-R)5 working modes - adds delay reminder and a different mode order with doorbell2026 catalog p37

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

S1-D (web ref. FX-S1-R)

Positioning: The four-mode standalone alarm - the simpler of the two for a buyer who only needs intrusion alerting and an opening reminder.

Best fit (recommended): Recommended for a basic retail safety pack on a front door or a fridge cabinet, where a short one-minute alarm is less likely to annoy neighbours.

S2-D (web ref. FX-S1-R)

Positioning: The five-mode version, adding a delay reminder for users who want a grace period before the alarm sounds.

Best fit (recommended): Recommended for a family entrance where one member needs time to disarm; the delay-reminder mode is the specific reason to step up from S1-D.

Key Characteristics

Door/window contacts, PIR motion sensors, sirens, push buttons, SOS buttons and remotes in one compatible accessory family

Magnet tolerance, RF behaviour and battery life engineered together

Modular face-cover and colourway options on the W1 / W5 / W6 contacts

Pairing matrix with T10 / T11 / T30 hubs confirmed in writing

Samples recommended for on-site range and compatibility testing

100% per-unit functional test

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.