WET01 Wired Doorbell Extender product photo
Product photos · OEM/ODM variants available
Wired Doorbell Extender WET Series · Smart Doorbells

Wired Doorbell Extender WET Series - Full Series

The WET series extends an existing wired doorbell to an extra chime without running new wire to the door: a built-in transmitter picks up the wired door station and sends a wireless signal to an additional receiver. Both models carry 58 tunes, 5 volume levels, a 650 ft wireless range, expandable pairing and smart memory; they differ in how the transmitter is powered.

2 modelsFactory directSamples available

Shared Platform Specification

All 2 models in this series share one electrical and radio platform. The table below is transcribed from the 2026 printed catalog and the forrinx.com listing; the only variables between models are the faceplate and housing finish shown in the next table.

Night light doorbell F9USB DC 5 V / 3 x AA; 58 melodies; 110 dB max; RF 433 MHz; 9-colour LED strobe; night light; mute timer 3/6/9/12 h; smart memory
Bluetooth recordable F5 AirAC 110-220 V 50/60 Hz; 1 min max recordable time; 9 + 1 recordable ringtone; 110 dB max; 4 volume levels; 433 MHz; 9 LED colours
Tower doorbell V1DC 5 V Type-C; 105 dB max; 58 melodies; multi-colour light indicator; 433 MHz; < 0.3 W; expandable
Wireless doorbell F8AC 110-220 V 50/60 Hz; 58-colour LED strobe; 58 melodies; 110 dB max; 300 m range; IP55; < 0.3 W; 433 MHz
USB chime U1DC 5 V receiver, 11 melodies, 105 dB max, 600 ft; transmitter 12 V alkaline, 500 ft, IP55; 433 MHz
Plug-through L5 seriesAC 110-220 V 50/60 Hz; outlet 15 A max; 110 dB max; 58 melodies; < 0.3 W; 433 MHz; 1000 ft; CE / FCC / RoHS
Wired extender WET01 / WET0258 tunes; 5 volume levels; 650 ft wireless range; no wiring needed; expandable; smart memory
RGB doorbell B292026 new release - AC 110-220 V 50/60 Hz; 58 melodies; 110 dB max; 300 m; IP55; 433 MHz; CE / RoHS; nameplate insert; false-trigger free
Shared featuresEasy to install, expandable, learning code, smart memory, optional push buttons P+ / P3 / P5 / BJ / WJ

Model Differences

The mechanical and radio core is identical across the series, and the 2026 catalog prints a single shared parameter set for the whole line. The difference between members is the faceplate and housing finish - request samples to compare the exact appearance of each model before committing to a SKU.

ModelWhat differsSource
WET01Built-in transmitter powered from the AC/DC 12-24 V wired doorbell circuit2026 catalog
WET02Built-in transmitter in a 12 V battery version2026 catalog

Model-by-Model Guide

Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.

WET01

Positioning: The mains-wired extender, drawing transmitter power from the existing 12-24 V doorbell circuit.

Best fit (recommended): Recommended where the door station already has a low-voltage wired supply - the transmitter is powered from that circuit, so there is no battery to maintain at the door.

WET02

Positioning: The battery-powered extender, for wired door stations with no accessible low-voltage supply.

Best fit (recommended): Recommended for older wired installations where the chime circuit cannot supply the transmitter; the 12 V battery version extends the door bell without electrical work at the door.

Key Characteristics

Feature-led differentiation: night light, RGB, recording, USB or socket receiver

Configurable light behaviour and sound set

Custom silhouette and colourway

Shared validated radio platform across variants

Appearance samples before tooling release

Applications

OEM / ODM Options

Quality gates: IQC → signed first article inspection → in-line AOI and board-level test → 100% per-unit functional test → signed final QC checklist with every order. Buyer and third-party factory audits are welcome.

Downloads & Next Steps

Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.

Frequently Asked Questions

What is the minimum order quantity?

MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.

Can we request samples?

Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.

Do you accept factory audits?

Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.

Will you sign an NDA?

Yes, before drawings or commercial details are exchanged.

Who owns the tooling?

Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.

Same category

Related Models

Ready to build your product line?

Send us the device type, target volume and launch market. Our engineering and certification team replies with a written feasibility view within one business day.