Shared Platform Specification
Platform behaviour printed for the production model: two independent zones, selectable high / low water level detection, audible and visual alarm with app notification, Wi-Fi 2.4 G. Configuration targets on the five ODM variants are marked as targets and fixed at scoping.
| Platform | One validated Wi-Fi alarm unit offered in six configurations; one in current production, five defined for ODM programmes |
|---|---|
| Detection | High water level and low water level modes, selectable at installation |
| Zones | 2 independent zones on the baseline platform |
| Alarm behaviour | Audible alarm, LED indication and app push notification when a high or low level is triggered |
| Connectivity | Wi-Fi 2.4 GHz with app push alerts; optional SMS, email or phone escalation configurable at ODM stage |
| Applications | Groundwater bilge pumps, water tanks, sewage tanks, septic pumps, grinder pits, low-density oils, swimming pools, ponds |
| Platform ODM options | Built-in backup battery, dual-float expansion, 110 dB high-output version with strobe indication, alarm-activated outlet for automatic pump control, extended 5 m float lead, configurable alarm volume and app stack |
| Approval discipline | Outlet rating, radio approval, enclosure sealing and float cable length are confirmed per configuration and per target market in writing at scoping |
Model Differences
The six entries are configurations, not faceplate colours. WLA-Z2-WiFi is in production; the other five add a specific function (backup power, second float, higher output, pump outlet or longer float lead) and require a written feasibility review.
| Model | What differs | Source |
|---|---|---|
| WLA-Z2-WiFi (web ref. WS01) | Current-production platform: DC 5 V Type-C, < 200 mA, 90 dB, IP67 float, 2 zones, Wi-Fi 2.4 G | 2026 catalog p36 |
| WLA-BB300 | ODM configuration: built-in rechargeable backup battery | ODM configuration - not in the printed catalog |
| WLA-Dual2 | ODM configuration: dual-float inputs for two monitoring points | ODM configuration - not in the printed catalog |
| WLA-H110 | ODM configuration: 110 dB output with red strobe and backup battery | ODM configuration - not in the printed catalog |
| WLA-Outlet | ODM flagship: alarm-activated outlet starts a connected pump automatically | ODM configuration - not in the printed catalog |
| WLA-Float5M | ODM accessory: 5 m extended float lead | ODM configuration - not in the printed catalog |
Model-by-Model Guide
Each model below has its own positioning and best-fit scenario, written so a buyer can tell at a glance which SKU to lead with. Where a note is a placement or channel recommendation rather than a printed specification, it is marked recommended.
WLA-Z2-WiFi (web ref. WS01)
Positioning: The production baseline against which every other WLA configuration is defined.
Best fit (recommended): Recommended as the starting sample for a distributor: it is the configuration with published catalog parameters, so range, alarm behaviour and app flow can be validated before a custom variant is scoped.
WLA-BB300
Positioning: The continuity configuration - keeps the alarm running when mains power fails.
Best fit (recommended): Recommended for a basement or septic installation where a power cut and a rising water level can happen in the same storm; the battery class and enclosure rating are set at scoping.
WLA-Dual2
Positioning: The two-point configuration, for a site that needs high and low level monitoring at separate places.
Best fit (recommended): Recommended for a pump chamber feeding a secondary tank: two floats let a buyer watch both levels from one app, subject to the pairing matrix agreed at scoping.
WLA-H110
Positioning: The high-output configuration, where a louder siren and a red strobe are the reason to step up.
Best fit (recommended): Recommended for a noisy plant room or an outdoor pit next to machinery, where a 90 dB indoor alarm could be missed; confirm the enclosure rating for the site.
WLA-Outlet
Positioning: The complete appliance configuration - detection, app alert and an outlet that can start the pump.
Best fit (recommended): Recommended as the quoted configuration for professional installers who want the pump action included in one device; outlet rating and plug standard must be confirmed for the target market.
WLA-Float5M
Positioning: The accessory configuration for deep pits and distant tanks, defined by cable length rather than by the alarm unit.
Best fit (recommended): Recommended as an upgrade line item for an existing WLA installation in a deep sump or a tank outside the building; confirm the connector before ordering.
Key Characteristics
High / low water level float monitoring with a WiFi 2.4 G alert unit
Alarm-activated outlet and backup-battery options configurable at scoping
IP67 probe enclosure and configurable cable length
Custom audible level, app identity, housing and retail packaging
Samples recommended for sump-pit validation
Applications
- Basement and sump pit protection
- Septic and sewage pump monitoring
- Pond, tank and water-level management
- Plumbing and property maintenance channels
OEM / ODM Options
- Housing / faceplate / colourway
- Logo, artwork and retail packaging
- Plug standard and regional configuration
- Firmware identity, chime or alert behaviour
- Bundle / kit composition
- Documentation and multi-language inserts
Downloads & Next Steps
Datasheet, compliance file and 2026 catalog are released on request so that you receive the current revision. Tell us the target market and estimated volume and we will reply with a written feasibility view within one business day.
Frequently Asked Questions
What is the minimum order quantity?
MOQ depends on the model, whether an existing housing is used and the level of customisation. Send the model, target volume and market and we will confirm it in writing.
Can we request samples?
Yes. Samples from existing platforms are typically prepared within 5-7 working days; custom appearance samples follow the ODM schedule.
Do you accept factory audits?
Yes. Buyer and third-party factory audits are welcome, and social and quality audits are supported.
Will you sign an NDA?
Yes, before drawings or commercial details are exchanged.
Who owns the tooling?
Tooling ownership and NRE amortisation are agreed in writing at scoping. We do not assume ownership of a customer-funded tool.
